Ready Net E200 Bedienungsanleitung PDF herunterladen (Seite 6)

Individual HomePlug AV Network Setup (Optional)

All HomePlug AV Ethernet Adapters ship with a default security key so they will automatically link to all other

HomePlug AV Ethernet Adapters sharing the same electrical lines. If there are other HomePlug AV Ethernet

Adapters in the

building (such as in an office or apartment building), you may want to create your own individual

HomePlug AV net-

work group so other HomePlug AV Ethernet Adapters cannot connect to your network.

This section describes how to use the Security button for configuration in the following situations:

2.1 Creating a new individual HomePlug AV network (Network AB)

Two unassociated Adapters (Adapter A and Adapter B) are forming a new network—Network AB

The procedure is as follows:

Press and hold the Security button on Adapter A for 10 seconds. Release it when the Power light flashes. The

password to Adapter A has just been erased. It must now be linked to your network to adopt the new network

se-

curity key.

Press and hold the security button on Adapter B for 10 seconds and release it when the Power light flashes. The

password to Adapter B has just been erased. It must now be linked to your network to adopt the new network

se-

curity key.

Currently, Adapter A and Adapter B are not networked

Press and hold the Security button on Adapter A for 2 seconds then release.

The Power light on Adapter A starts to flash.

Within 120 seconds after the Power light on Adapter A starts to flash, press and hold the Security button on

Adapter B for 2 seconds then release.

Both Adapter A and Adapter B are now networked together.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Ready Net E200 Bedienungsanleitung Seite 6